Regional Architecture Logo
 

Send Your Comments

E-Mail

TMC Work Zone Traffic Management Equipment Package

Architecture Geographic Scope

Description:

Coordination with maintenance systems using work zone images and traveler information systems (such as DMS), and distribution of work plans so that work zones are established that have minimum traffic impact.

 

Included in:

City of Victoria Traffic Operations Center
Municipal Traffic Operations Center
TxDOT Yoakum District Office -Traffic

Functional Requirements:

1The center shall receive work zone images from a maintenance center.
2The center shall analyze work zone images for indications of a possible incident.
3The center shall remotely control driver information systems (such as dynamic messages signs, highway advisory radios) to advise drivers of activity around a work zone.
4The center shall collect operational status for the driver information systems equipment in work zones.
5The center shall collect fault data for the driver information systems equipment in work zones for repair.
6The center shall receive proposed maintenance and construction work plans, analyze the activity as a possible incident, and provide work plan feedback to the sending center.
  

User Service Requirements (fully or partially addressed):

1.0TRAVEL AND TRAFFIC MANAGEMENT
1.5TRAVELER SERVICES INFORMATION
1.5.2TSI shall include an Information Access function that allows travelers to access the available information.
1.5.2.5Information Access shall provide the capability for travelers to access the TSI information via any of, but not limited to, the following methods:
1.5.2.5(a)Highway advisory radio.
1.6TRAFFIC CONTROL
1.6.3TC shall include a Device Control function.
1.6.3.3The Device Control function shall provide the capability to exercise control over those devices utilized for traffic control.
1.6.3.3.2Device Control shall include the capability to dynamically control traffic signing.
1.6.3.4Device Control shall communicate control data to the following devices.
1.6.3.4(c)Information signs.
1.7INCIDENT MANAGEMENT
1.7.0ITS shall include an Incident Management (IM) function. Incident Management will identify incidents, formulate response actions, and support initiation and ongoing coordination of those response actions. Four major functions are provided, which are, (1) Incidents Identification, (2) Response Formulation, (3) Response Implementation, and (4) Predict Hazardous Conditions.
1.7.1Incident Management shall provide an Incident Identification function to identify incidents.
1.7.1.1The Incident Identification function shall include the capability to identify predicted incidents.
1.7.1.1.1The Incident Identification function shall use information from the following types of sources, where available, to identify predicted incidents:
1.7.1.1.1(a)Traffic flow sensors.
1.7.1.1.1(b)Environmental sensors.
1.7.1.1.1(c)Public safety sources.
1.7.1.1.1(d)Media sources.
1.7.1.1.1(e)Weather information sources.
1.7.1.1.1(f)Transportation providers.
1.7.1.1.1(g)Sponsors of special events.
1.7.1.1.1(h)Hazardous condition prediction algorithms.
1.7.1.1.2The Incident Identification function shall determine at least the following characteristics of each predicted incident:
1.7.1.1.2(a)Type (including Terrain Hazards).
1.7.1.1.2(b)Extent.
1.7.1.1.2(c)Severity.
1.7.1.1.2(d)Location.
1.7.1.1.2(e)Expected duration.
1.7.1.1.3The Incident Identification function shall determine the expected traffic flow impact of each predicted incident.
1.7.1.2The Incident Identification function shall include the capability to identify existing (both planned and unplanned) incidents.
1.7.1.2.1The Incident Identification function shall use information from the following types of sources, where available, to identify existing incidents:
1.7.1.2.1(a)Traffic flow sensors.
1.7.1.2.1(b)Environmental sensors.
1.7.1.2.1(c)Public safety sources.
1.7.1.2.1(d)Media sources.
1.7.1.2.1(e)Weather information sources.
1.7.1.2.1(f)Transportation providers.
1.7.1.2.1(g)Travelers.
1.7.1.2.2The Incident Identification function shall determine and continuously monitor at least the following characteristics of each existing incident:
1.7.1.2.2(a)Type (including Terrain Hazards).
1.7.1.2.2(b)Extent.
1.7.1.2.2(c)Severity.
1.7.1.2.3The Incident Identification function shall determine and continuously monitor the current and expected traffic flow impact of each existing incident.
1.7.2IM shall provide a Response Formulation function to formulate appropriate response actions to each identified incident and revise those actions when necessary.
1.7.2.1The Response Formulation function shall propose and facilitate the appropriate scheduling of those predicted incidents that can be scheduled to minimize incident potential, incident impacts, and/or the resources required for incident management.
1.7.4IM shall provide the capability to Predict Hazardous Conditions, including the time and location of hazardous conditions that may cause an incident.
5.0EMERGENCY MANAGEMENT
5.1EMERGENCY NOTIFICATION AND PERSONAL SECURITY
5.1.3ENPS shall include a Remote Security and Emergency Monitoring (RSEM) function to create an environment of safety in secure areas.
5.1.3.5RSEM shall include a Physical Security System (PSS) function.
5.1.3.5.4PSS shall warn travelers of impending security system deployment via local information systems.
5.1.5ENPS shall include a Protect Sensitive Traveler Information (PSTI) function to inhibit distribution of traveler information that is deemed to be sensitive.
5.1.5.1PSTI shall notify transportation operators and information providers when access to information from ITS surveillance and sensor systems must be restricted.
5.1.5.2The PSTI notification shall identify the geographic area, time, specific devices, and/or other information necessary to determine the traveler information that must be protected.
5.1.5.3PSTI shall restrict access to traveler information for the affected area until access restrictions are removed.
5.1.5.4PSTI shall notify transportation operators and information providers when traveler information access restrictions are removed.
8.0MAINTENANCE AND CONSTRUCTION MANAGEMENT
8.1MAINTENANCE AND CONSTRUCTION OPERATIONS
8.1.0ITS shall provide Maintenance and Construction Operations (MCO) functions to support monitoring, operating, maintaining, improving and managing the physical condition of roadways, the associated infrastructure equipment, and the required resources. MCO shall focus on four major functions: 1) the Maintenance Vehicle Fleet Management function, to monitor and track locations and conditions of fleets of maintenance, construction, and specialized service vehicles; 2) the Roadway Management function, to monitor and forecast conditions and manage treatment of roadways during various travel conditions; 3) the Work Zone Management and Safety function, to support effective and efficient roadway operations during work zone activities; and 4) the Roadway Maintenance Conditions and Work Plan Dissemination function, to coordinate work plans and to communicate conditions. This User Service will utilize ITS systems and processes to support interchange of information among diverse groups of users, to improve efficiency and effectiveness of operational, maintenance, and managerial activities.
8.1.3Maintenance and Construction Operations shall provide a Work Zone Management and Safety (WZMS) function, which provides support for the effectiveness, safety, and efficiency of roadway operations during all work zone activities. This function includes interactions among Traffic Managers, Supervisors, Dispatchers, Field Crews, Construction Crews, Public Safety Organizations, Information Service Providers, and Travelers.
8.1.3.2WZMS shall support the management of data about work zones.
8.1.3.2.4WZMS shall provide information on work zone activities to other agencies, including but not limited to:
8.1.3.2.4(e)Traffic management systems
8.1.4Maintenance and Construction Operations shall provide a Roadway Maintenance Conditions and Work Plan Dissemination (RMCWPD) function to provide Intra- and Inter-agency coordination of work plans. This function includes interactions among Traffic Managers, Supervisors, Planning Agencies, Public Safety Organizations, and Information Service Providers.
8.1.4.1RMCWPD shall coordinate information on planned maintenance and construction activities, including work zone information, and unplanned remediation activities, such as inclement weather responses, so that routing, scheduling, and resource allocation can be accomplished.
8.1.4.2RMCWP shall support inter-agency coordination of response and scheduling of resources for significant events with broad impact, like natural disasters, major incidents, and large planned or seasonal events.
8.1.4.3RMCWPD shall coordinate information with other transportation agencies, including but not limited to:
8.1.4.3(d)Traffic Management
  
The detailed process and user service requirement traceability information on this page was extracted from the National ITS Architecture. Consult the National ITS Architecture web site for more information.

Last updated on 05-27-2005 using Ronald C. Ice and Associates Web Spinner Technology.