Mass.gov  
Office Of Transporation Planning Massachusetts DOT Office of Transportation Planning
Commonwealth of Massachusetts Regional ITS Architectures Commonwealth of Massachusetts Regional ITS Architectures Commonwealth of Massachusetts Regional ITS Architectures

On-board Transit Security


Equipment Package: On-board Transit Security

Description: This equipment package provides security and safety functions on-board the transit vehicle. It includes surveillance and sensor systems that monitor the on-board environment, silent alarms that can be activated by transit user or vehicle operator, operator authentication, and a remote vehicle disable function. The surveillance equipment includes video (e.g. CCTV cameras), audio systems and/or event recorder systems. The sensor equipment includes threat sensors (e.g. chemical agent, toxic industrial chemical, biological, explosives, and radiological sensors) and object detection sensors (e.g. metal detectors).
Included In: Local Transit Vehicles
MART Demand Response Vehicles
MART Fixed Route Transit Vehicles
MBTA Commuter Rail Vehicles
WRTA Demand Response Vehicles
WRTA Fixed Route Transit Vehicles
Functional Requirements 1 - The transit vehicle shall perform video and audio surveillance inside of transit vehicles and output raw video or audio data for either local monitoring (for processing or direct output to the transit vehicle operator), remote monitoring or for local storage (e.g., in an event recorder).
2 - The transit vehicle shall perform local monitoring of video or audio surveillance data collected inside of transit vehicles, and identify potential incidents or threats based on received processing parameters.
3 - The transit vehicle shall output an indication of potential incidents or threats and the processed video or audio information to the center along with the vehicle’s current location.
4 - The transit vehicle shall detect potential threats via sensors for chemical agents, toxic industrial chemicals, biological agents, explosives, and radiation.
5 - The transit vehicle shall detect potential threats via object detection sensors (e.g. metal detectors).
6 - The transit vehicle shall output an indication of potential incidents or threats and the processed sensor information to the center along with the vehicle’s current location.
7 - The transit vehicle shall accept sensor control data to allow remote control of the sensors.
8 - The transit vehicle shall monitor and output surveillance and sensor equipment status and fault indications.
9 - The transit vehicle shall accept emergency inputs from either the transit vehicle operator or a traveler through such interfaces as panic buttons, silent or audible alarms, etc.
10 - The transit vehicle shall output reported emergencies to the center.
11 - The transit vehicle shall receive acknowledgments of the emergency request from the center and output this acknowledgment to the transit vehicle operator or to the travelers.
12 - The transit vehicle shall be capable of receiving an emergency message for broadcast to the travelers or to the transit vehicle operator.
13 - The transit vehicle shall be capable of disabling or enabling the transit vehicle based on commands from the center or authentic inputs from the transit vehicle operator.
14 - The transit vehicle shall perform authentication of the transit vehicle operator.
 Region Home Page
 Stakeholders
 Inventory by Stakeholder
 Inventory by Entity
 Market Packages by Functional Area
 Market Packages by Stakeholder
 Market Package Descriptions
 Equipment Package Descriptions
 Architecture Flow Descriptions
 Project Documents
 Regional Projects
 Standards
Home | About Us | Employment | Contact Us | Site Policies Copyright © 2013 Commonwealth of Massachusetts