|
|
Equipment Package: Barrier System Management |
| Description: |
This equipment package provides the management of barrier systems for transportation facilities and infrastructure. Barrier systems include automatic or remotely controlled gates, barriers and other systems intended to preclude an attack or control access during and after an incident. When access to part of the transportation system is impacted by the activation of a barrier system, travelers and appropriate subsystems are notified. |
| Included In: |
AHTD Regional TMC
AHTD Statewide TMC
Fort Smith Traffic Operations Center
Greenwood Traffic Operations Center
Municipal Traffic Operations Center
ODOT Traffic Operations Center
Van Buren Traffic Operations Center
|
| Processes: |
1.1.4.2 - Provide Traffic Operations Personnel Traffic Data Interface
1.2.4.5 - Manage Barrier Systems
|
| User Service Requirements: |
1.0 -
TRAVEL AND TRAFFIC MANAGEMENT
1.6 -
TRAFFIC CONTROL
1.6.0 -
ITS shall include a Traffic Control (TC) function. Traffic Control provides the capability to efficiently manage the movement of traffic on streets and highways. Four functions are provided, which are, (1) Traffic Flow Optimization, (2) Traffic Surveillance, (3) Control, and (4) Provide Information. This will also include control of network signal systems with eventual integration of freeway control.
1.6.1 -
TC shall include a Traffic Flow Optimization function to provide the capability to optimize traffic flow.
1.6.1.7 -
Implementation of the Control function shall include strategies that account for at least the following:
1.6.1.7(a) -
Human factors.
1.6.3 -
TC shall include a Device Control function.
1.6.3.3 -
The Device Control function shall provide the capability to exercise control over those devices utilized for traffic control.
1.6.3.3.4 -
Device Control shall include the capability to exercise dynamic control over the infrastructure (such as reversible-lanes, turning restrictions, etc.).
1.6.3.4(e) -
Human operator support.
5.0 -
EMERGENCY MANAGEMENT
5.1 -
EMERGENCY NOTIFICATION AND PERSONAL SECURITY
5.1.3 -
ENPS shall include a Remote Security and Emergency Monitoring (RSEM) function to create an environment of safety in secure areas.
5.1.3.4 -
RSEM shall include a Monitor Alert Levels (MAL) function.
5.1.3.4.3 -
MAL shall increase system preparedness as the likelihood of an incident increases, including:
5.1.3.4.3(a) -
Activating physical security systems and implementing security procedures
5.1.3.5 -
RSEM shall include a Physical Security System (PSS) function.
5.1.3.5.2 -
PSS shall allow system operators to monitor and control operation of the physical security system devices, including operator override.
5.1.3.5.3 -
PSS shall provide current status of the system including readiness and activation to operators.
5.1.3.5.4 -
PSS shall warn travelers of impending security system deployment via local information systems.
|
Last updated: 09-15-05 |
