Home

Statewide:

 by Stakeholder

 by Entity

District 1

District 2

District 3

District 4&6

District 5

District 7

Turnpike
 

 Send Your 

 Comments



Roadside Safety Inspection Equipment Package

Description:

 This Equipment package provides the Commercial Vehicle Check Subsystem the capabilities for operators to automate the roadside safety inspection process including the support of use of hand held devices to rapidly inspect the vehicle and driver. In addition this Equipment package provides the Roadside Check Subsystem the capabilities for operators to automate the roadside safety inspection process including the support of automated mainline speed reading of on-board safety data to rapidly screen the vehicle and driver. This Equipment package shall also provide the capabilities to collect, store, maintain, and provide safety data and access historical safety data after receiving identification from vehicles at mainline speeds or while stopped at the roadside. Results of screening and summary safety inspection can be written back onto the tag. The capabilities to process safety data and issue pull-in messages or provide warnings to the driver, carrier, and enforcement agencies shall be provided. These capabilities have a prerequisite of the Roadside Electronic Screening Equipment package and shall be provided primarily through the utilization of an additional safety database. Since a vehicle may cross jurisdiction boundaries during a trip, this equipment package supports the concept of a last clearance event record (aka trip ticket ) carried on the vehicle s tag. The last clearance event record reflects the results of the roadside verification action. For example, if the vehicle is pulled over in State A and undergoes credential, weight, and safety checks, the results of the clearance process are written to the vehicle s tag. If the vehicle continues the trip and passes a roadside station in State B, the State B station has access to the results of the previous pull-in because it can read the last clearance event record written by the State A roadside station.

 

Included in:

 Agricultural Inspection Stations
Scales and Inspection Facilities (Including ASPEN)

Processes:
2.3.3.1Provide Commercial Vehicle Checkstation Communications
2.3.3.2Provide Commercial Vehicle Inspector Handheld Terminal Interface
2.3.3.3Administer Commercial Vehicle Roadside Safety Datadase
2.3.3.4Carry-out Commercial Vehicle Roadside Safety Screening
2.3.3.5Carry-out Commercial Vehicle Roadside Inspection
2.3.5Provide Commercial Vehicle RoadsideOperator Interface
  

User Service Requirements (fully or partially addressed):

4.0COMMERCIAL VEHICLE OPERATIONS
4.1COMMERCIAL VEHICLE ELECTRONIC CLEARANCE
4.1.1CVEC shall include a Fixed Facility consisting of those structures and equipment to include Ports Of Entry, Inspection Stations, Weigh Stations and Toll Booths.
4.1.1.1Fixed Facility shall provide the capability for states participation in the CVEC program to be voluntary.
4.1.1.2Fixed Facility shall provide the capability to support the enrollment of vehicles/carriers in the CVEC program.
4.1.1.3Fixed Facility shall provide the capability to accommodate both interstate and intrastate vehicles/carriers.
4.1.1.4Fixed Facility shall include that processing needed to issue pull-in for safety inspection signals of the following type:
4.1.1.4(a)Automatically generated from Pass/Need To Stop tests.
4.1.1.4(b)Randomly generated.
4.1.1.4(c)Manually generated.
4.1.1.5Fixed Facility shall provide the facility operator the capability to manually override the issuance of automatically and randomly generated Pull-In requests.
4.1.1.6When making the "Pass/Need To Stop" determination the FixedFacility shall perform checks on the following:
4.1.1.7Fixed Facility shall provide the capability to establish two-way communications with each vehicle approaching the facility.
4.1.1.8Fixed Facility shall include the capability to access and quickly update information on vehicle problems that are detected.
4.2AUTOMATED ROADSIDE SAFETY INSPECTION
4.2.2The ARSI capability shall include a Roadside Facility (RF) function that improves the ability to perform safety inspection through the use of automation.
4.2.2.1RF shall provide a processing capability that automates the roadside inspection tasks.
4.2.2.2RF shall include the capability to perform brake inspections at the roadside.
4.2.2.3RF shall include the capability for operators to use hand held devices to rapidly inspect vehicle and driver components that produce the following:
4.2.2.3(a)Pass/Fail results.
4.2.2.3(b)Data on actual condition.
4.2.2.3(c)Data on expected life projections.
4.2.2.4RF shall collect, store, maintain and provide real-time on-line interactive access to historical safety data at the roadside facility.
4.2.2.6RF shall provide the capability to automatically identify to the enforcement personnel approaching vehicles that have been flagged as potentially needing maintenance or put out of service.
4.2.2.7RF shall provide the capability to receive identification data from each vehicle that is stopped at the inspection station that enables the access and receipt at the roadside of historical safety records to include the following:
4.2.2.7(a)Carrier.
4.2.2.7(b)Vehicle.
4.2.2.7(c)Driver.
4.2.2.7(d)Cargo.
4.3ON-BOARD SAFETY MONITORING
4.3.1OBSM shall include a Fixed Facility (FF) capability for the analysis and control of safety information.
4.3.1.1The FF shall provide the capability to analyze data received from each vehicle approaching and determine the identification of:
4.3.1.1(a)Vehicle.
4.3.1.1(b)Driver.
4.3.1.3The FF shall provide capability to log the passing of each vehicle and the associated results from the decision of whether to request the vehicle to pull in or continue without stopping.
4.3.1.4The FF shall provide the capability to automatically make a decision as to whether to allow each vehicle to pass or require them to stop for a check.
4.3.1.5The FF shall provide the capability for enforcement officials to manually override the automatically generated decision for vehicles to pull-in for safety inspection.
4.3.1.6The FF shall provide the capability to perform pre-trip and post-trip inspections of each vehicle.
4.3.1.7The FF shall provide the capability to have two-way data exchange between the Roadside facility and each vehicle.
4.4COMMERCIAL VEHICLE ADMINISTRATIVE PROCESSES
4.4.2CVAP shall include an Automated Mileage and Fuel Reporting and Auditing (AMFPA) function that includes but is not limited to the following:
  
The detailed process and user service requirement traceability information on this page was extracted from the National ITS Architecture. Consult the National ITS Architecture web site for more information.

This page was last updated on 12-11-2000 using Web Spinner Technology.