Home

Statewide

District 1

District 2

District 3

District 4&6:

 by Stakeholder

 by Entity

District 5

District 7

Turnpike

 

 Send Your 

 Comments



ISP Probe Information Collection Equipment Package

Description:

This Equipment package supports the collection of vehicle probe data by the ISP. It provides the capability to accept and process probe vehicle information. This capability shall be provided through the use of additional hardware and probe vehicle control and tracking software.

 

Included in:

Broward County ITS Operations Facility
Palm Beach County ITS Operations Facility

Processes:

6.6.2.2Provide Vehicle Route Calculation Data
6.6.2.6Calculate Vehicle Probe Data for Guidance
  

User Service Requirements (fully or partially addressed):

1.0TRAVEL AND TRAFFIC MANAGEMENT
1.3.0ITS shall include a Route Guidance (RG) function. Route Guidance will provide travelers with directions to selected destinations. Four functions are provided which are (1) Provide Directions, (2) Static Mode, (3) Real-Time Mode, and (4) User Interface.
1.3.1RG shall include the capability to Provide Directions to travelers.
1.3.1.2The Provide Directions function shall issue directions to travelers that is based on information about current conditions of transportation systems.
1.3.1.2.1Current transportation system conditions upon which directions to travelers is based shall include, but not be limited to, the following:
1.3.1.3The Provide Direction function shall issue traveler directions that are simple and easy to understand in the form of arrow displays or voice messages providing turning instructions of which way to turn onto including, but not limited to, the following:
1.3.2RG shall include a Static Mode for issuing information to travelers.
1.3.2.1Static Mode shall provide travelers with information that includes, but is not limited to, the following:
1.3.2.1(b)Scheduling information about transit systems.
1.3.3RG shall include a Real-Time Mode for issuing information to travelers.
1.3.3.1The Real-Time Mode shall utilize current travel condition information to provide performance that is enhanced over the Static Mode performance, to include, but not be limited to, the following:
1.3.3.2The Real-Time Mode shall include the capability to operate in either or both of the following two configurations:
1.3.3.2.1Real-Time Mobile Based systems shall include the capability to receive infrastructure information, when available, and use it in determining routing.
1.3.3.2.2If current real-time information is included in route determination the system shall be denoted as an Infrastructure-based real-time system.
1.3.3.3The Real-Time mode shall provide the capability for autonomous operation of mobile-based systems.
1.3.4RG shall include a User Interface function.
1.3.4.2Mobile systems shall use the best information available to provide routing instructions.
1.3.4.3Infrastructure-based systems shall also permit individual travelers to customize their routing selection.
1.3.4.3.1Infrastructure-based systems shall use the traveler's destination information to estimate extra demand on the transportation system and then provide routing to the traveler based on this predicted demand.
7.0Information Management
7.1Archived Data Function
7.1.0ITS shall provide an Archived Data Function to control the archiving and distribution of ITS data. The Archived Data User Service provides the Historical Data Archive Repositories and controls the archiving functionality for all ITS data with five major functions: 1) the Operational Data Control function to manage operations data integrity; 2) the Data Import and Verification function to acquire historical data from the Operational Data Control function; 3) the Automatic Data Historical Archive function for permanently archiving the data; 4) the Data Warehouse Distribution function, which integrates the planning, safety, operations, and research communities into ITS and processes data products for these communities; and 5) the ITS Community Interface which provides the ITS common interface to all ITS users for data products specification and retrieval. ADUS helps achieve the ITS information goal of unambiguous interchange and reuse of data and information throughout all functional areas.
7.1.3The Archived Data Function shall include a Data Import and Verification (DIV) function to acquire historical data from the Operational Data Control function.
7.1.3.1DIV shall be capable of importing selected ITS Operational data from the ITS Operational Repositories.
7.1.3.1.8DIV shall be capable of importing ITS Vehicle and Traveler data to include:
7.1.3.1.8(a)Commercial and non-commercial vehicle probe data.
7.1.3.1.8(c)Vehicle trajectories.
  
The detailed process and user service requirement traceability information on this page was extracted from the National ITS Architecture. Consult the National ITS Architecture web site for more information.

This page was last updated on 12-11-2000 using Web Spinner Technology.