Home

Statewide

District 1:

by Stakeholder

by Entity

District 2

District 3

District 4&6

District 5

District 7

Turnpike

Send Your

Comments

Roadway Traffic Information Dissemination Equipment Package

Description:

This Equipment package provides the roadside elements of traffic information dissemination including DMS and HAR.

Included in:

Processes:

1.2.7.1	Process Indicator Output Data for Roads
1.2.7.5	Process Indicator Output Data for Freeways

User Service Requirements (fully or partially addressed):

1.0	TRAVEL AND TRAFFIC MANAGEMENT
1.10	Highway-Rail Intersection
1.10.3	At all HRIs with active railroad warning systems, HRI shall manage the traffic in the intersection.
1.10.3.1	HRI shall be capable of augmenting the intersection with standard highway traffic signal devices.
1.10.3.3	HRI shall provide an Intelligent Intersection Controller (IIC) function to manage highway and rail traffic in the intersection.
1.10.3.3.2	IIC function shall control active railway warning devices, including flashing lights and physical barriers for highway and walkway lanes at HRIs.
1.10.3.3.3	IIC function shall provide an intersection surveillance system to derive the real-time status of traffic in the intersection.
1.10.4	HRI shall include a Standard Speed Rail (SSR) Subservice to manage highway and rail traffic at HRIs for rail lines with operational speeds less than 80 MPH.
1.10.4.1	SSR shall include active railroad warning systems at designated HRIs.
1.10.5	HRI shall provide a High Speed Rail (HSR) Subservice for HRIs on rail lines with operational speeds between 80 and 125 MPH.
1.10.5.1	HSR shall include active roadside message devices to provide highway closure information at HSR HRIs.
1.10.5.2	HSR shall provide special safety features to enhance safety.
1.10.5.2.2	HSR shall include a positive barrier function( e.g. four quadrant gates) to close the intersection to highway traffic for rail lines operating at speeds over 110 MPH.
1.5.2	TSI shall include an Information Access function that allows travelers to access the available information.
1.5.2.5	Information Access shall provide the capability for travelers to access the TSI information via any of, but not limited to, the following methods:
1.5.2.5(a)	Highway advisory radio.
1.6	TRAFFIC CONTROL
1.6.0	ITS shall provide a Traffic Control capability. Traffic Control provides the capability to efficiently manage the movement of traffic on streets and highways. Four functions are provided which are (1) Traffic Flow Optimization, (2) Traffic Surveillance, (3) Control Function, and (4) Provide Information. This will also include control of network signal systems with eventual integration of freeway control.
1.6.3	Traffic Control shall include a Control Function.
1.6.3.3	The Device Control Function shall provide the capability to exercise control over those devices utilized for traffic control.
1.6.3.3.1	Device Control shall include the capability to control traffic signalization, including rapid modification of signalization parameters to respond to traffic requirements.
1.6.3.3.2	Device Control shall include the capability to control dynamically traffic signing.
1.6.3.3.3	Device Control shall include the capability to control freeway ramp metering.
1.6.3.3.4	Device Control shall include the capability to exercise dynamic control over the infrastructure (such as reversible-lanes, turning restrictions, etc.).
1.6.3.4	Device Control shall communicate control data to the following devices.
1.6.3.4(a)	Traffic signals.
1.6.3.4(b)	Ramp meters.
1.6.3.4(c)	Information signs.

The detailed process and user service requirement traceability information on this page was extracted from the National ITS Architecture. Consult the National ITS Architecture web site for more information.

This page was last updated on 12-11-2000 using Web Spinner Technology.