Home

Statewide

District 1:

 by Stakeholder

 by Entity

District 2

District 3

District 4&6

District 5

District 7

Turnpike
 

 Send Your 

 Comments



On-board Fixed Route Schedule Management Equipment Package

Description:

 This Equipment package provides the capabilities for automated planning and scheduling, by collecting data for schedule generation. Capability shall also be provided to automatically determine optimum scenarios for schedule adjustment. This Equipment package also supports the capability for two-way voice communication between the transit vehicle driver and a facility, two-way data communication between the transit vehicles and a facility, on-board safety sensor data to be transmitted from the transit vehicles to a facility, and data transmission from individual facilities to a central facility for processing/analysis if desired.

 

Included in:

 Collier County Deviated Fixed Route Buses
LeeTran Fixed Route Transit Vehicles
MCAT Transit Vehicles
SCAT Transit Vehicles
School Buses

Processes:
4.1.2.1Determine Transit Vehicle Deviation and ETA
4.1.2.2Determine Transit Vehicle Corrective Instructions
4.1.2.3Provide Transit Vehicle Driver Interface
  

User Service Requirements (fully or partially addressed):

2.0PUBLIC TRANSPORTATION MANAGEMENT
2.1.0ITS shall include a Public Transportation Management (PTM) function.
2.1.1PTM shall include an Operation of Vehicles and Facilities (OVF) function that provides computer assisted control of the operation of vehicles and their associated facilities.
2.1.1.2OVF shall include a Command and Control (CC) capability.
2.1.1.2.1CC shall provide the capability for real-time Vehicle Command and Control (VCC).
2.1.1.2.1.1VCC shall provide the capability to compare received information with predetermined operating condition specifications and note any deviations.
2.1.1.2.1.3VCC shall provide the capability to display any noted deviations.
2.1.1.2.1.4VCC shall provide the capability to automatically issue corrective Instructions to the driver including, but not limited to, the following
2.1.1.2.1.4(a)Route corrections.
2.1.1.2.1.4(b)Changes in stops.
2.1.1.2.2When CC detects a vehicle(s) has deviated from schedule it shall provide the capability to automatically determine the optimum scenario for returning the vehicle or fleet to schedule.
2.1.1.2.4CC shall include the capability for its computational capabilities to be located either on-vehicle and/or at remote locations.
  
The detailed process and user service requirement traceability information on this page was extracted from the National ITS Architecture. Consult the National ITS Architecture web site for more information.

This page was last updated on 12-11-2000 using Web Spinner Technology.